I’m wondering if any of the pins from the Daisy Submodule are not used by the Patch.Init()?
As in: free pins and which ones they are so I could tell if I could start with that as a basis and add a few more things. Thanks!
I’m wondering if any of the pins from the Daisy Submodule are not used by the Patch.Init()?
As in: free pins and which ones they are so I could tell if I could start with that as a basis and add a few more things. Thanks!
The patch.init schematic is available on its product page. Compare it to the Patch SM pinout.
I think only one CV out pin is not used.
Patch SM has two CV outs. On patch.init(), one CV out is wired to a jack, the other drives the LED.