Can’t seem to get the Daisy to show up in my usb devices list. It’s plugged in and running in “flash mode” with a solid red light. Any ideas or tips for troubleshooting?
$ lsusb
Bus 000 Device 001: ID 1d6b:PTLP
CIAR Linux Foundation USB 3.0 Bus
$ make program-dfu
dfu-util -a 0 -s 0x08000000:leave -D build/SimpleLed.bin -d 0483:df11
dfu-util 0.9
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
dfu-util: No DFU capable USB device available
make: *** [program-dfu] Error 74
Well I unplugged everything for brevity so the only thing plugged in was the Daisy.
I pressed the reset and boot buttons. Just a solid red light on the Daisy Seed. Lights on the Pod stop flashing after the reset+boot buttons are pressed.
I had the same problem and a different cable solved it for me as well. The bad cable successfully supplies power, but apparently doesn’t transmit data.