Hello Daisy World!
I got the seed in the mail yesterday! However after getting things set up via tutorials, wiki and forum troubleshooting I just cannot get the device to be recognized. Not through Vs Code, not in the web programmer. I am running Linux (System 76 Pangolin//Pop Os 21.10//AMD Ryzen 7) and nothing seems to fix the issue. I tried several cables and made sure that my usb port is in fact working properly.
I can’t get the Blink example flashed to the seed .
Error I get:
dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
dfu-util: No DFU capable USB device available
make: *** […/…/libDaisy/core/Makefile:289: program-dfu] Error 74
The terminal process “/usr/bin/bash ‘-c’, ‘make clean; make; make program-dfu’” terminated with exit code: 2.
One other suspicious looking bit in VS code under the terminal Output Tab <C/C++ Configuration Warnings>:
[4/10/2022, 7:41:41 PM] Unable to resolve configuration with compilerPath “/usr/local/bin/arm-none-eabi-g++”. Using “/home/pc84/Developer/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gcc” instead.
[4/10/2022, 7:41:41 PM] Unable to resolve configuration with compilerPath “/usr/local/bin/arm-none-eabi-g++”. Using “/home/pc84/Developer/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gcc” instead.
Once I get past this hump I’ll be on my way to making! Thank you!!!