Daisy PatchSM - ADC and pot value

Hardware Development
1

Is it OK to use 100K pots for ADC_9 /ADC_10, and also CV1-8 for PatchSM?
I’ve got a bunch of pots with 100K value but then I realized that input impedance could be too much for ADC.

Some of my pots (also 100K) are going to CD4051BM, but others are connected to ADC_9 and ADC_10. I want to make sure that this will not affect the resolution much.

2

It is fine to use 100K pots.

You won’t notice a difference between 100K or 10K in this application as long as they’re both linear.

1 Like